Kaisai KPC-09AK29, Руководство пользователя

Страница: 73 / 138

22
1. Remove the rubber plug at drainage port.
2. Fix the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
drainage port
drainage port
drainage pipe clip
screw
Note:
When using the continuous drainage option from the bottom hole, install
drainage pipe before using, otherwise poor drainage will affect normal
operation of the unit.
There are 2 ways to remove collected water:
■ Instructions for drainage pipe installation as follows.
Use the continuous drainage option from the bottom hole
1
Removing Collected Water
pipe hoop
drainage pipe
drainage
pipe clip
pipe hoop
rubber plug
21
Install W ire H ook
● Assemble the wire hook at the back of the unit with screws (the direction of wire
● Wind the power cord around the wire hook.
direction of wire hook is upward
direction of wire hook is downward
screw
wire hook
EN
73