Undercounter Refrigerators and Freezers
PAGE 19
7K - sEttInG tHE dAtE:
The date must be set in order for the data storage memory to correctly log events. Follow
the instructions to enter the service access code on page 8. When the control displays
Thermostat Set Point High, press the down arrow key until the control
display reads Date. Press the set button .
The display will show (year). The right two numbers will be flashing. Press
the arrow keys to set the year. When the correct year is displayed, press the
set button . The display will show (month). The right two numbers
will be flashing. Use the arrow keys to set the month. When the correct
month is displayed, press the set button . The display will show (day).
The right two numbers will be flashing. Press the arrow keys to set the
day. When the correct day is displayed, press the set button . The display will
then read Date. You can use the up or down arrow keys to
scroll to the next parameter. Press the alarm cancel button to exit .
7l - sEttInG dAYlIGHt sAVInGs tIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight
Savings Time. Follow the instructions to enter the customer access code on page 8.
When the control displays Thermostat Set Point High, press the down arrow
key until the display reads Daylight Savings Time.
Press the set button . The display will show Daylight Savings Time
(Yes, automatically adjust for Daylight Savings Time). For “YES” press the set button
,for “NO” press the up or down arrow key .
The display will read Daylight Savings Time (no). Press the set button .
The display will read Daylight Savings Time.
You can press the up or down arrow keys to scroll to the next parameter or
press the alarm cancel button to exit .
SET
SET
SET
SET
)
)
)
SET
SET
)
)
)
7. MIcRoPRocEssoR contRol
(cont.)
