1. Insert the blades with the main axis bar of the six angle gear.
2.Use screwdriver to tighten the screw in clockwise direction.
Install the blade protection frame to every corner and tighten the screws.
See diagram below:
Disassemble the blade
Install the blade
NOTE: If the quad-copter crashes, double check to make sure the blade
protection frame is not loose or broken.If the blade is broken, please
replace the protect shield right away
NOTE: If you prefer not to install blade guards, fillers are included to place in
the slots instead.
NOTE: It is important for the correct blade to be put on the correct motor or
the drone will not fly correctly. A letter is marked on each blade to
indicate which motor it should go on.
-6-
3URWHFWVKLHOGLQVWDOODWLRQ'LVDVVHPEO\
%ODGHLQVWDOODWLRQ'LVDVVHPEO\
Install the blade
Disassemble the blade
$
$
%
%
$
