Kahn Optisure Remote Скачать руководство пользователя страница 5

Страница: 5 / 54

Optisure Remote User’s Manual

Kahn Instruments

Safety

The manufacturer has designed this equipment to be safe when operated using the procedures

detailed in this manual. The user must not use this equipment for any other purpose than that

stated. Do not apply values greater than the maximum value stated.

This manual contains operating and safety instructions, which must be followed to insure the safe

operation and to maintain the equipment in a safe condition. The safety instructions are either

warnings or cautions issued to protect the user and the equipment from injury or damage. Use

qualified personnel and good engineering practice for all procedures in this manual.

Electrical Safety

The instrument is designed to be completely safe when used with options and accessories supplied

by the manufacturer for use with the instrument. The input power supply voltage limits are 85 to

264 V AC, 47/63 Hz

. Refer to Appendix A - Technical Specifications.

Pressure Safety

DO NOT permit pressures greater than the safe working pressure to be applied to the sensor. The

specified safe working pressure is 290 psig (20 barg) or 3625psig (250barg) for the high pressure

version. Refer to Appendix A - Technical Specifications.

Application of gas pressures higher than the specified maximum will result in potential damage

and may render the instrument unsafe and in a condition of incorrect functionality. Only personnel

trained in the safe handling of high pressure gases should be allowed to operate this instrument.

Refer to Appendix A - Technical Specifications.

Repair

The instrument must be repaired by the manufacturer. Please contact Kahn Instruments at parts.

[email protected].

Calibration

The recommended calibration interval for the Optisure Remote is one year, unless otherwise specified

by Kahn Instruments. The instrument should be returned to Kahn (please contact parts.service@

kahn.com).

Содержание Optisure Remote























































Результаты поиска

Содержание Optisure Remote

Отзывы:

Похожие инструкции для Optisure Remote

Бренды по названию

Популярные бренды

Kahn Optisure Remote, Руководство пользователя

Результаты поиска

Содержание Optisure Remote

Отзывы:

Похожие инструкции для Optisure Remote

Бренды по названию

Популярные бренды