Kahn Optidew Series, Руководство пользователя

Страница: 29 / 88

Optidew User’s Manual
20 October 2019
OPERATION
3.1.5 Sensor Status Display
TEC Drive
Indicates the whether the
sensor is heating or cooling the
mirror:
Also indicates the power level
applied as a percentage to
total possible.
Optical Signal
Indicates the reflectivity of
the mirror, and whether this
is clean or has a condensate
formation.
The target is 100% signal level,
which indicates the optimal film
thickness has been achieved.
0% indicates that the mirror is
free of condensate.
For further information see
section 4.2.1.
Connected
sensor
Shows the sensor type that the
control unit is configured for.
To connect a 1-Stage sensor
to a control unit configured
for 2-Stage or vice-versa,
you must first use the PC
Application Software to enter
the sensor configuration
code found on the calibration
certificate.
Refer to section 6.2 Exchanging
Sensors.
Logging
When shown, the Optidew is
currently logging data to SD.
See section 4.4.6 for further
information.