Kaden Installation Manual |
21
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a
wall-mounted bracket.
Unit mounting dimensions
The following is a list of different outdoor unit sizes and the
distance between their mounting feet. Prepare the installation
base of the unit according to the dimensions below.
Model
Outdoor unit dimensions (mm)
W x H x D
Mounting dimensions
Distance A (mm)
Distance B (mm)
KSI06 / KSI09
770x555x300
487
298
KSI12
800x554x333
514
340
KSI18, 24, 28
890x673x342
663
354
If you will install the unit on the ground or on a concrete
mounting platform, do the following:
1. Mark the positions for four expansion bolts based on
dimensions in the unit mounting dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Clean concrete dust away from holes.
4. Place a nut on the end of each expansion bolt.
5. Hammer expansion bolts into the pre-drilled holes.
6. Remove the nuts from expansion bolts, and place outdoor
unit on bolts.
7. Put washer on each expansion bolt, then replace the nuts.
8. Using a wrench, tighten each nut until snug.
WARNING
When drilling into concrete, eye protection is
recommended at all times.
W
A
B
D
Air inlet
Air inlet
Air outlet
W
H
