Kaden KS09, Руководство пользователя

Страница: 7 / 16

Kaden Owners Manual | 7
When using COOL or DRY mode, do not set louver at too
vertical an angle for long periods of time. This can cause water
to condense on the louver blade, which will drop on your floor
or furnishings. (See
Fig. A )
When using COOL or HEAT mode, setting the louver at too
vertical an angle can reduce the performance of the unit due
to restricted air flow.
Do not move louver by hand. This will cause the louver to
become out of sync. If this occurs, turn off the unit and
unplug it for a few seconds, then restart the unit.
This will reset the louver.
Setting vertical angle of air flow
While the unit is on, use the vertical SWING button
to set the direction (vertical angle) of airflow.
1. Press the vertical SWING button once to activate the
louver. Each time you press the button, it will adjust the
louver by 6°. Press the button until the direction you
prefer is reached.
2. To make the louver swing up and down continuously,
press and hold the vertical SWING button for 3 seconds.
Press it again to stop the automatic function.
Setting horizontal angle of air flow
While the unit is on, use the horizontal SWING button to set the
direction (horizontal angle) of airflow.
1. Press the horizontal SWING button once to activate the
louvre. Each time you press the button, it will adjust the
louvre by 6º Press the button until the direction you
prefer is reached.
2. To make the louvre swing side to side continuously,
press and hold the horizontal SWING button
for 3 seconds. Press it again to stop the
automatic function.
Fig. A
Fig. B
Rang
e
Caution: Do not keep louver at too
vertical an angle for long periods of
time. This can cause water condensation
to drip on your furnishings.
Deflector
rod
The louver can
be taken down
by releasing the
lock block.
Fig. A
Fig. B
Rang
e
Caution: Do not keep louver at too
vertical an angle for long periods of
time. This can cause water condensation
to drip on your furnishings.
Deflector
rod
The louver can
be taken down
by releasing the
lock block.
Sleep
Mode
Timer
Turbo ION
LED
ON/OFF Fan
Follow
me
Self
clean
+
-
Sleep
Mode
Timer
Turbo ION
LED
ON/OFF Fan
Follow
me
Self
clean
+
-
Fig. A
Fig. B
Rang
e
Caution: Do not keep louver at too
vertical an angle for long periods of
time. This can cause water condensation
to drip on your furnishings.
Deflector
rod
The louver can
be taken down
by releasing the
lock block.
Setting Angle of Air Flow
Note on louver angles
CAUTION
Do not put your fingers in or near the blower and suction
side of the unit. The high-speed fan inside the unit may
cause injury.
J3499_Kaden_Owners Manual_240817_V3.indd 7 28/08/2017 8:59 AM