Kaden KDI42, Руководство по установке, Страница: 9 / 40

Kaden Installation Manual | 9
Indoor unit installation instructions
Step 1: Select installation location
The indoor unit should be installed in a location that meets the
following requirements:
✓ Enough room for installation and maintenance.
✓ Enough room for the connecting pipe and drainpipe.
✓
The ceiling is horizontal and its structure can sustain the
weight of the indoor unit.
✓
The air inlet and outlet are not impeded.
✓ The airflow can fill the entire room.
✓ There is no direct radiation from heaters.
Fig. 4.2
Step 2: Hang indoor unit
1. Please refer to the following diagrams to locate the four positioning screw bolt holes on the ceiling. Be sure to mark the places
where you will drill ceiling hook holes.
This unit has been installed with an air intake pipe flange, but there is no air filter. (
See Fig. 4.3 and Fig. 4.4
)
Fig. 4.3 (applicable to KDI36, KDI42 and KDI48)
Maintenance room
Air inlet
Air outlet
600mm
or more
500mm
or more
600mm x 600mm
checking orifice
29
14
NOTE: 12 groups all around NOTE: 14 groups all around
130
170
550
380
1200
900 270
1000 (air outlet duct flange)
6
2 1 3 5 4
6
334
253
Ø
5
2 –
Ø
3.2
10
10
Ø
5
2 –
Ø
3.2
10
10
495
(suspension
position)
29
14
1236 (suspension position)
925
325
1145 (air inlet duct flange)
OUT IN
Supply air Return air
Return air
Supply air