13
LOCKING THE NETWORKER
To prevent any unwanted alterations being made to the coolers settings, the Networker can be locked via a 4- digit
PIN code�
Setting the PIN
1� Press the FUNCTION button (2), followed immediately by Key 2 (15)�
The screen will then display
“Enter Your PIN number to lock the system”
�
DO NOT ENTER NUMBERS AT THIS STAGE AND CONTINUE TO THE NEXT STEP.
2� Push the MODE button (3)�
The screen will now display
“User PIN reset – Enter master PIN”
�
DO NOT ENTER NUMBERS AT THIS STAGE AND CONTINUE TO THE NEXT STEP.
3� Push the MODE button (3)�
The screen will now display the message “
User PIN number 1 alteration - Enter current
PIN”
�
•
If this is the first time for setting the PIN, the current PIN will be “
1111
”.
•
If the PIN has been previously altered then enter your current PIN�
The screen will then display the message,
“Enter the new PIN”
�
4� Enter your new 4-digit PIN number using a combination of Keys 1 to 5 (14 to 18)�
The screen will now display,
“Repeat the entry of the new PIN”
�
Providing that you re-enter the new PIN correctly, the screen will now display
“Valid PIN – PIN altered”
�
5� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN�
6�
To exit this area at any time, just push the ON/OFF key (1).
To lock the Networker
1� Press the FUNCTION button (2), followed immediately by Key 2 (15)�
The screen will then display
“Enter Your PIN number to lock the system”
�
2� Enter your current user PIN to lock the Networker�
The screen will now display
“System locked out!”
3� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN�
NOTE
If an invalid PIN is entered, the message
“Invalid PIN entered - Try again”
will scroll across
the screen. The user has three attempts at entering a valid PIN. On the third failed attempt the
message
“Invalid PIN entered!”
will be displayed. At this point the Networker will abort the PIN
entry screen, and return to its original state. You will then need to repeat the process.
A flashing Padlock icon (12) indicates that the Networker is locked.
To unlock the Networker
1� Press the FUNCTION button (2), followed immediately by Key 2 (15)�
The screen will then display
“Enter Your PIN number to unlock the system”
�
2� Enter your current user PIN to lock the Networker�
The screen will now display
“System unlocked!”
3� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN�
NOTE
If an invalid PIN is entered, the message
“Invalid PIN entered - Try again”
will scroll across
the screen. The user has three attempts at entering a valid PIN. On the third failed attempt the
message
“Invalid PIN entered!”
will be displayed. At this point the Networker will abort the PIN
entry screen, and return to its original state. You will then need to repeat the process.
BATTERIES
The Networker requires no batteries� If the Networker has no screen, check your 240 volt power supply (at the
Cooler) or check the thermostat cable�
