12
Kaden Owner’s Guide
Evaporative Air Coolers
1
9
2
6
5
3
7
4
12
10
13
11
14
15
16
17
18
25
23
24
CODED MESSAGES
While the Networker is operating your system, it is also monitoring and controlling every aspect of the system's
performance� If anything unusual occurs, the Networker will display an error message�
•
A message (23) stating
"Cooler Fault - E01 Code #?? For assistance call for service"
will scroll across the top
of the screen� Note that the message will vary depending on the problem�
•
Whenever such a message appears, it is a good idea to write it down before doing anything else� This code
contains information that will enable the service provider
to deal quickly and easily with anything that requires
their attention� In this instance contact
1300 4KADEN (1300 452 336)
and pass on the message, the model and
the type of appliance�
MESSAGE REPEATING
Push the FUNCTION button (2) then Key 1 (14) immediately after to repeat a message�
NOTE
If no message repeats it means either the button combination was incorrect or the event has
passed. Typical messages displayed advise of some appliance operations such as - “Pre-Wetting
cooler pads - Please Wait!”.
SERVICE NOTIFICATION MESSAGE
When the operating hours logged for an appliance exceeds the predetermined period, the Networker wall control
will display a service notification message.
•
A message (23) stating
"Fan run hours indicate it is time for a service call"
will scroll across the top of the screen�
Note that the message will vary depending on the problem�
•
The Spanner Icon (24) will flash once every second on the Networker wall control display.
You may book a service call or clear the spanner icon notification by pressing Key 4 (17) on the Master Controller.
RESETTING
If something has interrupted the units operation, the word Reset (25) may appear beside Key 4 (17) while a
message is scrolling� Press Key 4 (17) to re-start the Cooler�
If the Cooler does not resume normal operation, or the error message re-appears, please contact
1300 4KADEN (1300 452 336)
�
If the Cooler is still operating but the Networker is showing an error message try pushing the Reset Key 4 (17) to
clear the fault� If the fault persists contact
1300 4KADEN (1300 452 336)
�
If the Cooler is not operating and any other error message appears, contact
1300 4KADEN (1300 452 336)
�
