C o n f i g u r a t i o n a n d O p e r a t i o n
Page 30
Installation Instructions blueplanet XP10U H4 / H6 and XP10U H4 / H6 PSD
Operating state
LEDs
Display
Description
Feed-in operation
Power fed into the grid
or measured values
The green “Operating” LED is illuminated.
The green “Feed-in” LED is illuminated.
The inverter is exporting energy into the utility
grid.
Non-feed-in
operation
Status message
The display shows the corresponding message.
Voltage
Fault message
The display shows the corresponding message.
The red “Fault” LED is illuminated.
8.1.2 Graphical
display
The graphical display shows measured values and data and allows the confi guration of the inverter using a graphical
menu. In normal operation, the backlighting is switched off . As soon as you press one of the control keys, the backlight is
activated. If no key is pressed for an adjustable period of time, it switches off again. You can also permanently activate or
deactivate the backlighting. In sleep mode, the inverter deactivates the display regardless of the selected setting.
NOTICE
Depending on the tolerances of the measuring elements, the measured and displayed values
are not always the actual values. However, the measuring elements ensure maximum solar yield.
Due to these tolerances, the daily yields shown on the display may deviate from the values on the grid
operator’s feed-in meter by up to 15%.
After being switched on and after the initial start-up is complete, the inverter displays the home screen. If you are in the
menu and do not touch the control keys for two minutes, the inverter display defaults to home.
For information about initial start-up, see section 8.2 on page 32.
1
2
3
4
5
6
7
8
Figure 19: Display home screen
Key
1
Current date
6
Status bar
2
Current power
7
Current time
3
Menu indicator
8
Feed-in indicator
4
Daily yield
5
Annual yield
