Turn the dial to the left
Loosen
Tighten
Turn the dial to the right
Adjusting TRIFIT Adjuster Dial
●
Use the Adjuster dial for
adjustment. Do not forcibly
loosen/tighten the adjuster without
using the dial. It may break the
mechanical system inside the dial.
●
Be careful with your hair,
especially long hair, so it does not
get tangled in the TRIFIT Adjuster.
Hold the front part and turn the dial.
"TRIFIT Adjuster" is the mechanism at the rear of the helmet to keep the helmet from moving.
Adjust TRIFIT Adjuster so it will keep the helmet on your head securely.
First, loosen TRIFIT Adjuster dial, and put on the helmet.
Then, hold the front side of the helmet against your head and tighten the adjuster dial.
02
TRIFIT Adjuster
Hold the front side of the helmet and
tighten the TRIFIT Adjuster using the
adjuster dial.
Arranging TRIFIT Adjuster Position
You can change the position of TRIFIT Adjuster either backward or forward with its arm, and to 3 different angles at the
rear. Select the most comfortable angle.
■
Switching the arm attachment position
(backward and forward)
When switching the arm position either to backward or
forward, make sure to hold near the base of the arm attaching
part. Pull gently and it can be removed. When attaching, push
the pin at the edge of the arm into the basket hole (Fig.1).
* If the fitting is loose even after TRIFIT Adjuster is tightened maximum,
attach the arms into the forward holes.
basket holes
basket holes
Pin
Attach backward
Attach forward
Fig. 1
5
Hold the base
of the arm to
detach
Warning!
