Kabuto FLAIR, Инструкция по эксплуатации, Страница: 21 / 25

21
To Detach
Front pad is attached on the helmet with the same fixing method (snap) of the
adjuster. Hold the root of the fixing part indicated by circle in Fig.1, then pull it out
to detach. (Fig.2)
(Four points of fixed part)
Linings
3
Detach/ Attach front pad
Front Pad
Fixing part
To Attach
Attach the front pad at the front side.
(Fig.3 circled part)
*Attach both side of the front pad to
the rear side fixing holes on the
helmet.
●To detach the front pad, make sure to hold the root of the fixing part. Pulling or
twisting it by force will lead to the breakage.
●Make sure to remove the front pad once before attaching or detaching the A.I.
Net.
Fig. 2
Fig. 3
Fig. 1
To clean and exchange the front pad, please follow the procedures below.
Four points
of fixed part
Four points
of fixed part
CAUTION!