Kabuto FLAIR, Инструкция по эксплуатации, Страница: 19 / 25

19
When adjusting the angle of Adjuster, make sure
to hold near the base of the adjuster. Do not force
or twist the adjuster as this may break the
adjuster.
WARNING!
Changing the adjuster height
(3-levels up and down)
Hold near the base of Adjuster and slide it up or
down (low, mid or high) to adjust the angle. (Fig. 1)
The forth bigger hole at the bottom is used to
detach/ attach Adjuster (Fig.2). Make sure to
change the angle carefully, or the adjuster will be
detached from the fourth hole.
XF-7 Adjuster XF-7 Adjuster
The fourth hole
Fig. 1
Fig. 2
❶
❷
❸
How to adjust the SLW-1 Adjuster
Mounting part Mounting part
Adjustable at
3 heights
CAUTION!
First, loosen the adjuster, then wear
the helmet. Adjust the fit by
tightening the adjuster with the
slider.
●Be careful with your hair, not to
get it tangled in the slider at the
adjustment procedure.
●SLW-1 Adjuster is ultra light,
intended to be used at special
occasion such as racing. As
such, it is designed to simplify its
adjustment function and enhance
its durability by cutting down its
weight to the limit. Please be
aware the adjuster durability may
be deteriorate significantly by
frequency, application, and
condition of usage.
Slider
Loosen
Tighten
squeeze
and move
outward
squeeze
and move
inward
Pinch and squeeze the slider with both
hands to operate.