Kaba SIMPLEX 3000 NARROW STILE Скачать руководство пользователя страница 8

8

Kaba Access Control warrants this product to be free from defects in

material and workmanship under normal use and service for a period of

one (1) year. Kaba Access Control will repair or replace, at our discre-

tion, Simplex Locks found by Kaba Access Control analysis to be defec-

tive during this period. Our only liability, whether in tort or in contract,

under this warranty is to repair or replace products that are returned to

Kaba Access Control within the one (1) year warranty period.

This warranty is in lieu of and not in addition to any other warranty or

condition, express or implied, including without limitation merchantabil-

ity, fitness for purpose or absence of latent defects.

ATTENTION: This warranty does not cover problems arising out of

improper installation, neglect or misuse. All warranties implied or writ-

ten will be null and void if the lock is not installed properly and / or if

any supplied component part is substituted with a foreign part.  If the

lock is used with a wall bumper, the warranty is null and void. If a

doorstop is required, we recommend the use of a floor secured stop.

The environment and conditions of use determine the life of finishes 

on Kaba Access Control products. Finishes on Kaba Access Control

products are subject to change due to wear and environmental 

corrosion. Kaba Access Control cannot be held responsible for the 

deterioration of finishes.

Authorization to Return Goods

Returned merchandise will not be accepted without prior approval.

Approvals and Returned Goods Authorization Numbers (RGA Numbers)

for the Simplex 3000 Series are available through our Customer

Service department in Winston-Salem, NC 800.849.8324 

The serial

number of a lock is required to obtain this RGA Number

. The

issuance of an RGA does not imply that a credit or replacement will be

issued.

The RGA number must be included on the address label when material 

is returned to the factory. All component parts including latches and

strikes (even if not inoperative) must be included in the package with

return. All merchandise must be returned prepaid and properly pack-

aged to the address indicated.

KABA SIMPLEX

®

LIMITED WARRANTY

Содержание SIMPLEX 3000 NARROW STILE

















Отзывы: