Kaba SIMPLEX 3000 NARROW STILE, Руководство по установке

Страница: 6 / 16

6
C. OPERATING INSTRUCTIONS
Note : All locks are shipped with the following combination:
#2 and #4 pushed at the same time, then #3. For proper security,
the factory set code must be changed at the time of installation.
C-1 Gaining Access By Combination Code
A . To clear any previously depressed code buttons, turn the thumb
turn to the left (counterclockwise) and release (See Figure 3-1) .
B . Depress the code buttons in the proper order of your
combination. Release buttons after depressing.
C . Turn the thumb turn clockwise to the stop position. Observe the
latch being retracted to unlock the door (See Figure 3-2) . The
lock will lock automatically when the thumb turn is released.
C-2 Gaining Access By Key Override
Insert cylinder key into cylinder on combination lock side of
door. Turn the key in clockwise direction (approximately 90°)
(See Figure 3-3) . The latch should retract. Turn the key back to
key pull position and remove.
C-3 Locking Out Combination Code Access
A. Insert cylinder key into cylinder on combination lock side
of the door. Turn key in a counterclockwise direction to the
stop position (See Figure 3-4) . Return the key to the pull
position and remove. The thumb turn should not turn while
the lock is in this mode.
B. To allow access again through a combination code, insert
key, turn clockwise approximately 45°. Return the key to
the pull position and remove (See Figure 3-5) .
Figure 3-3
Figure 3-4
Figure 3-5
Figure 3-1
Figure 3-2