Kaba SIMPLEX 3000 NARROW STILE, Руководство по установке

Страница: 4 / 16

4
B. MOUNTING LOCK TO STILE
B-1 Place combination lock assembly over lock-in studs and slide downward
until a stop position is attained (approximately 1 ⁄
8
" of movement) (See
Figure 2-1) . The top of the lock housing and drive assembly should be
flush when properly positioned.
Note : Before closing door, refer to operating instructions to check out the
operation of all lock functions.
Combination
Lock Assembly
A
As shown on Each
Drive Assembly
•
31
⁄
32
" B.S. - L.H. Drive
•
31
⁄
32
" B.S. - R.H. Drive
• 1 1 ⁄
8
" B.S. - L.H. Drive
• 1
1
⁄
8
" B.S. - R.H. Drive
Housing Locator Stud
Drive Assembly
(Sample Illustration)
Latch Direction Will
Vary Based on Swing of
Door (Illustration Shows
Outswing Door)
Lock-In Studs
Figure 2-1