8
k2evo708xy-2012-01
Kaba s-module for c-lever
EN
Quick guide
Installation
Fitting the inside lever handle
11. Fit the inside lever handle on the
spindle and secure with the fixing
screws.
12. Screw the lever handle fixing screw
into the lever handle and tighten.
NOTE:
If the internal shield has no
cylinder holes, the battery circuit
board must be plugged into the
outlet on the right (13) of the s-
module.
The battery circuit board does not
have a loading function.
Attaching the connecting cable
13. Route the connecting cable
through the cylinder hole of the
inside unit to the s-module (8) and
connect according to the terminal
connections.
12-24 V AC/DC, at least 0.4 A
Cable: 0.6 - 1.2 mm
14. Insert the batteries (14) again
where necessary.
15. Replace the internal shield and
secure with the fixing screw.
13
14
8
14
