6
k2evo708xy-2012-01
Kaba s-module for c-lever
EN
Quick guide
Installation
Installation instructions
Detaching the internal shield
1. Loosen fixing screw for internal
shield (1) and remove.
2. Lift off the internal shield (2).
NOTE:
The internal shield cannot
be removed completely in the case
of some handle styles!
Removing the batteries and inside
lever handle
3. Remove batteries from the battery
circuit board (6).
4. Loosen the lever handle fixing
screw (3).
5. Unscrew the 3 fixing screws (4) for
the lever handle bearing using a
T20 star screwdriver and lift the
inside lever handle (5) off the
spindle.
NOTE:
The battery circuit board (6)
must also be removed in the case of
the internal shield with cylinder
holes.
1
2
3
4
5
6
ATTENTION
Danger of damage to electronic components from electrostatic discharge.
This product contains electronic components that are sensitive to electrostatic
discharge (ESD). Contact by persons or objects can cause an electrostatic
discharge that may damage or destroy the product. To avoid the risk of electrosta-
tic discharge, note the handling guidelines and recommendations according to
EN100015-1.
Only transport and send removed modules in protective bags.
