Installation
Quick Guide
Kaba c-lever
k2evo707xy-2012-05
15
for replace of rosettes
EN
marking
plug
20
5
16
15
7
1
6
21
10
Push the support plate for the inside
shield (20) over the spindle (5) and the
locking cylinder (16) on the inside of
the door. In doing so, route the
antenna cable (15) through the cut-
out in the support plate (20). Then
screw the support plate (20) into the
outer shield (1) using the fixing screws
(7) (Torque: 2.5 ±0.5 Nm).
Fit antenna plug with crimping pliers
(11674572 ECL.ZANGE.VERBIN-
DUNGSKABEL) as illustrated.
Unscrew the internal lever handle
from the internal furniture (6).
Position the inside unit with the e-
module (6) and secure to the support
plate using the fixing screws (21).
Insert the batteries (10) and slip the
battery protection foil (8) between the
batteries.
NOTE:
Only use lithium
batteries on outside doors.
Ensure correct battery polarity!
