background image

Target Audience

Please read and follow all directions carefully. These instructions are designed for use by 
maintenance professionals or lock installers who are familiar with common safety practices and
competent to perform the steps described. Kaba Ilco is not responsible for damage or malfunction
due to incorrect installation, however arising.

Definition of Terms

In these instructions, the term 

AMM

refers to 

American Motorized Mortise, and

SMM

refers to 

Slim

Motorized Mortise.

Technical Assistance

For technical assistance, call: 

1 800 906-4526

Warnings and Cautions

I I

INTRODUCTION AND DISCLAIMERS

7 1 0 - I I / 7 4 0   S E R I E S   I N S TA L L AT I O N   G U I D E   •   P K 2 7 1 0 / 0 8 / 0 2

P a g e   4

Please read and follow all directions carefully.

!

Important: Carefully inspect windows, doorframe, door, etc. to ensure that the recommended
procedures will not cause damage. Kaba Ilco’s standard warranty does not cover damages caused
by installation.

!

Important: For auto-deadbolt models, the gap between
the mortise front plate and the strike must be less
than 

1

/

4

”, or the automatic deadbolt will not extend.

!

Caution: Wear safety glasses when making the holes.

!

Door Door 

Frame

Mortise

Max. 

1

/

4

Содержание AADB













Отзывы: