LC SERIES
M
ODELS
LCLX, LCMX
O
PERATING
I
NSTRUCTIONS
The following instructions cover lock operations for
LC Series
locks. The lock models are
battery powered (PowerSaver
TM
technology). See back page for Battery Replacement
instructions.
SUPER MASTER CONTROL
The Super Master Combination is a six-digit combination used to reset the lock to the
factory default combination (
50 25 50
) in the event the user combination(s) are lost.
See
the Super Master Operations sheet (P/N 394.101).
LOCK MODES
A maximum of two users can exist in a lock. A lock can operate in either
Single Mode
or
Dual Custody Mode
.
•
Single Mode
E
Single Mode
defaults to having only a
Manager User
(User 1) in the lock. A
second
user
(User 2)
can then be added by the Manager User (User 1).
(See section on
Manager User Operations
.)
In Single Mode only one valid user combination is required to open the lock - the Manager
User (User 1) combination or the User 2 combination.
Note:
Default lock status from the factory is Single Mode with an opening
combination of “50 25 50” for the Manager User (User 1).
•
Dual Custody Mode
E
E
Dual Custody Mode
defaults to two users in the lock -
User 1
and
User 2
.
Both user combinations are required to open the lock - the User 1 combination and the
User 2 combination.
Note:
Manager User Operations are not available in Dual Custody Mode.
LOCK OPERATION & RESPONSES
• Each keystroke generates a green flash
G
with a beep
8
8
8
8
8
.
• To cancel entry, press
.
• The completion of a step within an operation is indicated by a green flash
G
with a beep
8
8
8
8
8
.
• The successful completion of an operation is indicated by two green flashes
with beeps.
G
8
8
8
8
8
G
8
8
8
8
8
• An error is indicated by five green flashes with beeps.
G
8
8
8
8
8
G
8
8
8
8
8
G
8
8
8
8
8
G
8
8
8
8
8
G
8
8
8
8
8
• A low battery is indicated by 5 series of three green flashes with beeps
G
8
8
8
8
8
G
8
8
8
8
8
G
8
8
8
8
8
after a lock opening.
(See
Battery Replacement
on back page.)
