13
14
P-SETTINGS
P0
Tire diameter (8 for mantis 8, 10 for mantis 10). Do not change.
P1
System voltage. Default 60V. Do not change.
P2
Motor magnetic pole setting. Default 15. Do not change.(Mantis 10)
Motor magnetic pole setting. Default 10. Do not change.(Mantis 8)
P3
Speed signal selection. Default is 0. Do not change.
P4
Distance / speed unit. 0=km, 1=miles
P5
Start setting. 1=non-zero start (Kick-and-Go), accelerator won’t work if scooter is not in motion; 0
=immediate start (CAUTION while using this)
P6
Cruise control. 0=cruise control OFF, 1=cruise control ON. Advanced riders only.
P7
Initial acceleration. 0=strong power, 5=least power.
P9
Motor torque. 1=50% of max. torque, 2=75% of max. torque, 3=max. torque
PA
Electric (regenerative) braking strength (E-ABS). 0=None, 1=Weak, 2=Medium, 3=strong.
PB
Display brightness (0=off, 5=highest illumination)
PC
Scooter auto-turn off time in minutes (1-30 minutes).
PD
ABS (anti-lock braking system) setting. 0=ABS off, 1=ABS on (as in a car, the brake engages
and disengages rapidly to prevent the wheel from blocking)
WARNING: Due to increased vibration and force and on scooter components when using
ABS, frequently check that all bolts are properly fastened.
Cruise Control. Cruise control allows you to maintain your driving speed automatically without
continuing to hold down the accelerator. In order to enter Cruise Control, activate it first in the
P-settings [P6].
While driving, keep the accelerator steady for 3-5 seconds until Cruise Control kicks in and scooter
travels at a constant speed without driver holding down the accelerator. When you activate the
brakes, Cruise Control will be cancelled. CAUTION: Ride in a position where you can immediately
access the brake to cancel Cruise Control if necessary.
SCOOTER MAINTENANCE & TRANSPORT
Never perform maintenance on this product while the unit is powered on or charging. Always
power off before performing maintenance.
Do not attempt to perform repairs or modify the
scooter but contact your place of purchase or refer to a professional repair facility.
Clean stains on your scooter’s body with a damp cloth. Do not use alcohol, gasoline, kerosene, or
other corrosive and volatile chemicals. Do not wash with high pressure cleaners. Make sure the
scooter is turned off and unplugged during cleaning and ensure no moisture enters the charging
port.
When transporting your scooter, please take into account that it contains lithium-ion batteries
that are considered a hazardous material.
Always exercise caution and follow applicable rules and regulations when transporting your
scooter. It is very likely that you will not be allowed to take your scooter and battery on an
airplane.
NOTE:
The parts and screws in the
1.2.3.4.5
positon shown in the fiqure,in order to prevent
metal fatiqure accidents,please replace these 5pcs screws after each year or reach 5,000
kilometres.please check or replace these parts at the nearest after-sale maintenance store.
Regularly check the wheels, brake pads, and vulnerable parts of the wires, and replace them
in time.
Self-tightening nuts and other self-tightening fasteners may fail, please contact the dealer
for replacement in time.
It is forbidden to modify or repair the vehicle without authorization.
NOTE:
INFORMATION, SPECIFICATIONS, WARNINGS AND ALL OTHER DETAILS INCLUDED IN
THIS MANUAL ARE SUBJECT TO CHANGE AT ANY TIME, WITHOUT PRIOR WRITING. INQUIRE
WITH THE VENDOR'S AFTER-SALES DEPARTMENT FOR MORE INFORMATION.
Содержание Mantis 48V 13Ah
Страница 4: ...1 2 Technical Specifications...
Страница 5: ...3 4 Key Components MANTIS 10 MANTIS 10 MANTIS 8...
Страница 11: ...15 MEMO 06...
