K9 SAPPHIRE, Руководство пользователя

Страница: 6 / 11

Just hold it up with the back of the collar facing you, there is a small hole between the
two prongs, just puff into the hole and the collar will make a beep sound, do it again,
and the collar will again make the another beep sound. Now do it a third time and the
collar will make the beep sound again, and then vibrate. Now you know you collar is
working correctly. We have a video which shows you exactly how to do it.
Now you have tested the collar take the sensitivity all the way down to number 1 by pressing
the S button on the collar, until you have NO LIGHTS… If your dog barks and the collar does
not Work as it should, press the S button once this will increase the sensitivity to number 2,
You should now have 1 green light, if your dog barks again and no collar reaction, once again
press the S button, continue this until the collar Reacts immediately after your dogs bark.
YOUR COLLAR IS SET UP CORRECTLY….
6