K9 SAPPHIRE, Руководство пользователя

Страница: 4 / 11

Putting the Collar on Your Dog:
Switch the Collar off so the collar has been disabled. And adjust to the correct length,
(there is a short video to help you if needed) the prongs MUST be against your dog's
skin to work, and the Hole MUST be free of any Obstruction.…
If for any reason you took your collar apart and are unable to put your collar together
correctly please watch the video provided,
When the collar has been assembled correctly the collar DOES NOT SLIP, IT WILL NOT
LOOSEN.. The end of the strap will be on the inside and NOT the outside. If you are
experiencing problems with the collar loosening please re-watch the video using the
pause button.
Place the collar around your dog's neck, it must not move, if it does then adjust and
tighten the collar. Hold the unit and try to move it, when it does not move and you can
slide just one finger under the collar that is now correctly fitted.
If the Collar is too long then cut the excess and trim the end, then seal using a flame, watch
this video to do it correctly….
4