K-TEK KP, Руководство по установке и эксплуатации

Страница: 3 / 20

KP-0200-1 Rev f (10-2010) DCN0536 3
DEVICE SPECIFICATIONS:
Operating Temperature: -40 to 170
o
F / -40 to 76
o
C
Operating Pressure: 0 to 140 psi / 9.5 bar
Operating Power: 4 Watts @ either 120Vac or 240Vac
Switch Rating: AC Rating: 20 Amp Resistive, 1 HP@120VAC, 2 HP@250VAC
DC Rating: ½ Amp@125VDC, 1/4Amp@250VDC
Lamp Load Rating: 10 Amp@125VAC
Motor Speed:
1 RPM @ 60 Hz
Device Ratings: FM and CSA: XP, CL I, DIV 1, GP CD
DIP, CL II, DIV 1, GP EFG, CL III
T6 @ 76
o
C (170
o
F)
ATEX: II 2 GD EEx d IIC T6 (T 76°C) D 03ATEX133019
INSTRUMENT MARKING DETAILS
MODEL NO:
SERIAL NO:
0539
CONFIGURATION:
CONDUIT SEALS OR STOPPING BOX REQUIRED
CAUTION: DO NOT OPEN IN PRESENCE OF EXPLOSIVE ATMOSPHERE
OR WHEN ENERGIZED
ATTENTION: NE PAS OUVRIR EN PRESENCE D'ATMOSPHERE EXPLOSIF
OU SI L'APPAREIL EST EN SERVICE
0036
D) SERIAL NUMBER DESIGNATION:
SERIAL NUMBER IS DEFINED BY THE
JOB NUMBER.
JOB NUMBER FORMAT IS AS FOLLOWS:
YYMM-NNNN WHERE
YY = LAST TWO DIGITS OF YEAR
MM = NUMBER OF MONTH
NNNN = SEQUENTIAL NUMBER
A) INSTRUMENT VOLTAGE:
EITHER BOX MARKED PER MOTOR VOLTAGE
C) CONFIGURATION DETAILS:
MARKED EITHER /MP2 OR /MP4 FOR MOUNTING FLANGE TYPE
MARKED EITHER /CS OR /CF FOR SHAFT TYPE
MARKED EITHER /P1,2,3, OR 4 FOR PADDLE TYPE
EITHER BOX MARKED PER POWER PACK DESIGNATION
BASED ON VOLTAGE (2A OR 3A)
B) POWER PACK DESIGNATION:
MADE IN USA
II 2 GD EEx d IIC T6 (T 70 C) D 03ATEX133019
TAG0045
IP65
PRAIRIEVILLE, LOUISIANA, 70769 USA
POWER: 4 WATTS
120 VAC
KP
/P1
/2
/MP2
240 VAC
/P3 /P2
/2A
/MP4 /3
/CS
/P4
/CF
/3A
TYPE 4 TAG0044 NEMA 4
T6 @ 76°C (170°F)
CL I, Zn 1 &2, AEx d IIB
FM
APPROVED
T6 @ 76°C (170°F)
- DIP, CLII, DIV1, GP EFG, CLIII
- T6 @ 76°C (170°F)
MADE IN USA
- XP, CL I, DIV1, GP CD
Ex d IIB
OR