K-Star K1030, Руководство по эксплуатации

Страница: 7 / 10

7
MAINTENANCE
Proper maintenance of the Range Hood will assure proper performance of the unit.
Filters
The filters must be cleaned approximately once every
30 hours of operation (when the central segment on the
display goes on or starts blinking).
Use a warm detergent solution. Grease filters are
dishwasher safe.
Remove filter by pushing filter towards the back of hood
and rotating filter downward.
Hood Cleaning
Stainless steel is one of the easiest materials
to keep clean. Occasional care will help preserve its fine appearance.
Cleaning tips:
l Hot water with soap or detergent is all that is usually needed.
l
Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water
marks.
l
For discolorations or deposits that persist, use a non-scratching household cleanser or stainless
steel polishing powder with a little water and a soft cloth.
l For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser and
water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too
much pressure which may mar the surface.
l DO NOT allow deposits to remain for long periods of time.
l DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface
causing rust.
l DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in
contact with stainless steel for extended periods. Many of these compounds contain chemicals
which may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
OPERATION
PiC 3
PiC 4
PiC 5