K-Star K1030, Руководство по эксплуатации

Страница: 8 / 10

8
Controls
Always turn the hood ON before cooking in order to establish an air flow in the kitchen. After
turning off the range, let the hood run for a few minutes to clear the air.
l Push button
1. Push stop button, and the motor will stop.
2. Push the Low button, the buzzer will buzz once, and the motor runs at low speed.
3. Push the high button, the buzzer will buzz once, and the motor runs at mid speed.
4. Push the High button, the buzzer will buzz once, and the motor runs at high speed.
5. Push the light button and the two lights will come on. Push it again and the light
will turn off.
L
ow
M
id
H
ig
h
L
ig
h
t
S
to
p
L
ow
M
id
H
ig
h
L
ig
h
t
S
to
p
L
ow
M
id
H
ig
h
L
ig
h
t
S
to
p
NORMAL BULBS
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Rotate and loose the bulbs. CAUTION: BULB MAY BE
HOT, PLEASE ROTATE WHEN THE BULB IS COOL!
2. Replace with Type JC, 120Volt, 40Watt Max, E14. bulb. Do
not touch replacement bulb with bare hands! If the bulb is
touched with the bare hand, it should be cleaned with a
lint-free cloth moistened with methylated spirit.
WARRANTY
We will warrant this product free from defects in material and quality for one year and motor for
5 years. If any problems occur from correct usage, please contact the service department for
under warranty service.
This warranty does not cover the following:
The filter mesh and bulb.
Commercial use.
Amendment of the date of manufacture on the rating plate.
Damaged caused to the body by usage of detergent sprayer.
Pollution made to the led parts, glass parts and S/S parts.
Incorrect installation, misuse, abuse or neglect.
Incorrectly fitted to insufficient or unsuitable power.
Taken apart or serviced by unauthorized service engineers or replaced with other manufacture’s
components.
For commercial use the maintenance and free service should be discussed with our authorized
agent.
Beyond the 12 month limited warranty period, the purchaser should pay for charge of
components and call out.
In the event of a service call, please provide the warranty card and receipt of date of purchase.