K-Rain RPS469, Инструкция по эксплуатации

Страница: 14 / 36

Manual oPeratIons
The controller will start running all stations with the selected run time. The time will decrement in
the display and will sequentially move through all stations, running them for the same set period of
time. This option is designed so that it is possible to test all sprinklers and valves that make up the
irrigation design.
To skip to the next station press the
button. To go back a station press the
button. To stop
the system test, change the position of the main dial, to “OFF” .
hint:
If you wish to alter the default value from 2 mins to some other value and set this as the new
default time, press the and together followed by button. Then alter the run time using
the or buttons. Once the new default time is set press the button again, and the new
default will now always appear when you select a “manual system test”.
run a ProGraM
To manually run a complete program or to stack multiple programs to run, rotate the dial
to
“Run Program” . The word “OFF” will be flashing.
The DiSplay Will ShoW:
To enable program 1 to start press the button.
The icon “OFF” will change to “ON” .
This program has now been enabled so that it can be
run. To make program 1 run, press the
button.
nOtE:
So long as there are run times in program 1 then program 1 will start and water the stations
associated with it.