K.M.E. VSS 18, Руководство пользователя, Страница: 4 / 36

4
5. The connection panel
1. 2. 3. 4. 5. 7. 7. 6.
Power
1. Power switch,
Attention:
please turn down all volume controls before switching on the VSS 18
to avoid an undesirable sound reproduction.
2. GROUND/FREE switch (disconnects the ground of the input channels from chassis to avoid
ground loops)
3. Fuse holder (replace fuse only by type 10A slow blowing fuse 5x20 mm)
4. Mains connector - PowerCon in / link,
Attention:
use the correct mains voltage of 90 - 250 V AC / 50 - 60 Hz
Connections
5. Line in & link out - XLR balanced, analogue/digital switchable (see navigation structure);
link out is only active when the VSS 18 is powered on
6. Line in & link out - XLR balanced, always analogue;
link out is only active when the VSS 18 is powered on
7. Speaker output - 2x Speakon NL 4 (2x 500 W @ 4 Ohm (min. impedance), depending on
preset),
Attention:
Please mind nominal load and impedance of the passive loudspeaker(s)
you connect.