K.M.E. VSS 18, Руководство пользователя

Страница: 12 / 36

12
9. Choose your factory preset - play!
In this part of the user manual you will find a structured digest about the procedure for the
necessary settings with the main menu and its functions. If you pay attention to that
a riskless use of the VSS 18 is ensured.
10. The most important menu functions
10.1 Powering up
Switch on the VSS 18 when all volume pots are are turned fully anti-clockwise / left stop
and all connected components are switched on and muted previously to avoid an
unwanted sound reproduction.
Because the VSS 18 can be in „lock-function“ for rental purposes that means the VSS 18
may not (depending on adjustment) react on changes on the control panel and this can
cause an immediate reproduction when switching it on. Therefore it is necessary to mute
all connected devices previously.
After switching on the VSS 18 all volume pots should be turned to 0 dB (center click) with
deactivated „lock-function“ to keep a defined signal level and an optimal controlling
(this adjustment is a recommendation)
Note! During power on for the very first time Preset 1 „SD 7 OMNI“ is loaded! More
information about the initial state you can find on page 3.
10.2 Choosing presets
To control the respective system optimally the valid preset has to be load. You must
select it and load your latest PA-setup as preset on the control panel of the VSS 18.
Follow the instructions (e.g. select SD 8)!
After power on the VSS 18 for the very first time the left graphic appears on the LCD display. You
have to press the marked arrow key of the navigation pad once to select preset 2 „SD8 OMNI“
and confirm with the OK-key. In this case this procedure has to be done once again on the
second VSS 18 of the SD8.
If you control your PA system with an analogue audio signal,
you can start now!