K.M.E. VERSIO VL 750, Руководство пользователя

Страница: 4 / 28

5. The control- and connection panel
1.
2.
3.
4.
5.
6.
7.
8.
9.
Operation and audio input
1. The LCD display is used as operation mode display of the VL 750 / VL 760. The arrows in the
LCD display show the directions to navigate through the submenus (see navigation structure).
All software parameters must be set on the unit itself. Press the ‘OK’ button to select a parameter
if you are asked by the unit.
2. Navigation pad - The navigation pad is to be used for accessing and changing parameters on
the display of the hardware unit. Press the OK button if you are asked by the software (see
navigation structure).
3.
LINE in & link - XLR balanced, analogue/digital switchable (see navigation structure);
link out is only active when the VL 750 / VL 760 is powered on
4. Volume control (adjustable from - ∞ to +6 dB),
Attention:
please turn down volume control
before switching on the VL 750 / VL 760 to avoid an undesirable sound reproduction.
5. Multi-colour LED signalizing different parameters:
LED does not light up - there is no input signal
LED lights up green - there is an input signal
LED lights up blue
- the adjusted user threshold value is exceeded
LED lights up orange - max. input level, the limiter is working
LED lights up red - there is a malfunction, you must power cycle the VL 750 / VL 760
Power
6. Mains connector PowerCon in (blue) + link (grey),
Attention:
use mains voltage of
90 - 250 V AC / 50 - 60 Hz
7. GROUND/FREE switch (disconnects the ground of the input channels from chassis to avoid
ground loops)
8. M8 eyebolt
9. mains fuse (replace fuse only by type 4A slow blowing fuse 5x20 mm)