10.2 Fitting the flying frame FRQ 12 / FRQ 15
For install the VL 750 / VL 760 with the flying frame FRQ 12 / FRQ 15, please follow the
instructions (see following photos):
•
Attention! Remove all cables from the box, especially the power cable. Place the box on the
ground on solid underground! Please lay down also the flying frame with the three delivered
screws for fitting the box with the flying frame.
•
At first remove the top (u-bracket) of the flying frame and put it aside.
•
Unscrew now the four screws of the flying frame. After this you have to fix the VL 750 / VL 760
within a vertical position of 0° into the lower part of the flying frame.
•
Unscrew the three plastic-screws on top of the VL 750 / VL 760. After this you have to fix the
top part of the flying frame on the box with the three delivered screws.
•
Now you have to screw on the top part onto the lower part of the flying frame with two screws
on the left and right side to fix the VL 750 / VL 760.
•
At last step you have to mount the top (u-bracket) of the flying frame again to finish the
installation. If you have some additional accessories for flying the VL 750 / VL 760, you can
mount it now.
Attention!
Please mind that the user is responsible for safely flying the
equipment (according to BGV_C1).
Содержание VERSIO VL 750
Страница 1: ...User Manual VL 750 VL 760 ...
Страница 27: ......