15
12.3 Entering password
To lock the DA 230
with
a password (max. 8 digits) you have to enter it first. This
password can be changed or erased every time.
Note!
Keep in mind resp. note down the entered password because if you want to
„unlock“ your DA 230 you have to enter the password again (see „lock“-function). Should
you have forgotten the password, you have no possibility to re-activate the DA 230.
Please contact the K.M.E. support! Should the entered password had been cleared, e.g.
after a rental, you have to assume a manipulation. Follow now the instructions to activate
the menu point!
5x
2x
Press the marked arrow keys of the navigation pad one after another (like shown in the scheme)
to open the sub menu „password“. Now you can enter your password with the help of encoder A
and confirm with OK. You can leave the menu by pressing the left arrow key.
12.4 The „lock“ - function
To lock your DA 230 (with or without password) please do the following instructions:
Set all required parameters (also the encoders = volume control) and press, like shown in
the graphics, the OK-button for 2 seconds and your system is locked (now your unit is
ready for a rental, for example). After pressing the OK-button you have to disconnect the
mains plug to switch off the unit. When you connect the mains plug again
the “lock-function” is re-activated. That means you can not change any settings while the
“lock-function” is activated. To deactivate the “lock-function” you have to press the OK
button again for 2 seconds and, if entered before, enter your password by the help of
encoder A and confirm with OK.
2 sec.
