14
12. The most important menu functions
In this part of the user manual you will find a structured digest about the procedure for the
necessary settings in the main menu and its functions. If you pay attention to that
a riskless use of the DA 230 is ensured.
12.1 The „mute”- function
This function enables to mute separately every single channel of DA 230 with just one
touch of a button.
Press for 1 second the encoder A or B to mute the channel. A repeated pressing of the particular
encoder causes the deactivation of the „mute“-function (see display).
If the „mute“- function was activated (before switching off the DA 230), the „mute“- function is still
activated after switching on the DA 230 again.
If you are pressing an encoder for a short time during the „mute“- function is activated, you will
see the state of the particular channel (it effects also when the „mute“- function is not activated).
You can also generate “mute groups” (see page 9).
12.2 Switching input A between “analog” or “digital” or „auto detection“
The DA 230 offers the opportunity to plug in two analogue audio signals or one analogue
and one digital audio signals. If you want to use a digital audio signal you have to switch
the input A to „digital“ (see page 10). In the delivery status input A is switched to
„analogue“. That means the DA 230 can be driven by two analogue input signals.
Further you can select the menu item „auto detection“ for an automatical detection of the
input signal of channel A.
5x
Press the marked arrow keys of the navigation-pad one after another (like shown in the scheme),
to switch the input to „analog“ or „digital“ or “auto detection” (by the help of the encoder). After the
correct selection of the input, press the OK-button and leave the menu with the left arrow key.
