Example:
Main PA system could be a K.M.E. CA 6, both top units CSA 400 D are equipped
with DDM modules. Both modules are switched to ‘external’ operation mode
In the delay speaker positions work two additional K.M.E. CSA 400 D
You will need the following cable connections:
• 1 balanced audio line (XLR) running from Line-Out [8] on the DDM
to the Line-In of the CSA 400 D at the delay position
• mains power line to the CSA 400 D at the delay position
1.) Set the unit on the DDM to ‘meters’ [4]
2.) Set the DDM to „EXTERNAL“ operation mode [5]
3.) Set the estimated delay distance [3], [2]
4.) Turn DOWN the volume of BOTH CSA 400 D
5.) Activate the test tone function [6]
6.) Turn up the volume on the main PA until the test tone is audible at the position
of the delay speaker. Turn up the volume on the delay speaker until you hear
the signal in the same sound pressure level than the signal from the main PA
7.) Fine-adjustment of the delay time (distance) using + / - keys [3], [2], until only
one sound pulse (without “echo”) is audible – ready.
8.) Turn off test tone [6] and turn up the volume of both systems as necessary.
9.)
Содержание CSA 400 D
Страница 1: ...User Manual DDM Digital Delay Module for CSA 400 D QSA 200 D QSA 500 D ...
Страница 7: ......
