manualshive.com logo in svg

K-Line Speedtiller 2945, Руководство по безопасности оператора

Поделиться
Скачать
K-Line Speedtiller 2945 Скачать руководство пользователя страница 31

2945R RIGID TRAILING SPEEDTILLER            OPERATOR & SAFETY MANUAL

  

31

USEFUL HINTS

*NB -

 INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH

RAM STOP COMBINATIONS

FIELD OPERATION

Figure 38

1.  Cross working at 15 degrees off line gives better leveling and trash clearance.

2.  Full ground disturbance starts at 63.5mm (2.5 inches).

       Adjustment should be made to compensate for disc wear and concavity.

3    To improve weed control and for better soil disturbance.

•  Adjust lateral disc positioning.

•  Ensure machine is traveling in line.

•  Increase depth to cut.

•  Replace discs.

BLOCKING IN EXCESSIVE TRASH

•  Lower rear discs gang to drive  better in soil.

•  Adjust angle of lift soil deflector to allow greater flow.

•  Try reducing speed slightly.

CLOGGING IN WET SOILS

1. Raise working depth.
2. Raise front discs.
3. Give soil more time to dry out.

2945R Op manual.indd   31

2945R Op manual.indd   31

31/07/2020   11:32:41 AM

31/07/2020   11:32:41 AM

Содержание Speedtiller 2945

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды