K-Line Speedtiller 2945 Скачать руководство пользователя страница 3

Страница: 3 / 56

2945R RIGID TRAILING SPEEDTILLER OPERATOR & SAFETY MANUAL

Dear Customer

Thank you for purchasing a 2945R Rigid Trailing Speedtiller. We would like to assure you that you have

made a good choice, and will be able to rely on this high quality piece of equipment. We ask you to follow

the user’s instructions closely, as this will ensure that you experience the benefits of using the machine

without experiencing the unnecessary down time caused by misuse.

When you receive the machine, make sure that it has not been damaged during transportation and that

no parts are missing. Contact your dealer immediately if any parts are missing. Ensure that all

components are correctly adjusted.

The return of the Warranty Registration Form

Page 51

will enable a prompt and efficient identification of

your 2945R and attention to any concern you may have.

Before operating

PLEASE TAKE THE TIME TO LEARN

the process of operation. Do not take the unit for

granted; ease into becoming familiar with your new equipment. The operator should be a responsible

adult familiar with farm machinery and trained for this purpose. Do

NOT

allow persons to operate or

assemble the unit until they have read this manual and understand how to use this machine, and observe

the safety precautions.

Never exceed the limits of this machine. If its ability to do a job, or to do so safely is in question -

DO NOT

TRY IT.

DO NOT

attempt to operate this equipment under the influence of drugs or alcohol.

Remember - Your best assurance against accidents is a careful and responsible operator.

If you have any questions not answered in this manual or require additional copies or the manual is

damaged, please contact your dealer or be free to phone us on our free call number:

USA - 1800 445 6882

AUS - 1800 194 131

The team here at K-Line Agriculture trust you enjoy a good season and prove the benefits of owning and

operating a quality machine that is built to perform.

Signed:

James Larsen

General Manager

2945R Op manual.indd 3

31/07/2020 11:32:31 AM

Содержание Speedtiller 2945

























































Результаты поиска

Содержание Speedtiller 2945

Отзывы:

Бренды по названию

Популярные бренды

K-Line Speedtiller 2945, Руководство по безопасности оператора

Результаты поиска

Содержание Speedtiller 2945

Отзывы:

Бренды по названию

Популярные бренды