manualshive.com logo in svg

K-Line Speedtiller 2945, Руководство по безопасности оператора

Поделиться
Скачать
K-Line Speedtiller 2945 Скачать руководство пользователя страница 25

2945R RIGID TRAILING SPEEDTILLER            OPERATOR & SAFETY MANUAL

  

25

SPEED RANGE

•  8-15km/hr (5-9 mph).

•  Speed variable to suit conditions.

Slow down in terrain such as rocks or other 

difficult operating conditions.

WARNING:  USE OF MACHINE BEYOND ITS LIMITS OR INTENT OF OPERATION 

WILL VOID WARRANTY.

       WARNING

In field adjustments machine must be:

•  Lowered to ground 

  OR,

•  Placed in raised position with all safety locks 

       engaged with engine shut down.

FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH.

Refer to Ram stop combinations, Pg 31

IT IS THE RESPONSIBILITY OF THE OPERATORS TO:

Read and understand your manual.

Take time to familiarize yourself with the operation of this machine, 

particularly the safety signs and devices fitted to this machine.

FIELD OPERATION

2945R Op manual.indd   25

2945R Op manual.indd   25

31/07/2020   11:32:40 AM

31/07/2020   11:32:40 AM

Содержание Speedtiller 2945

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды