Trasformatori elettrici
Stabilizzatori di tensione
Convertitori di Frequenza
UPS, Inverter, Alimentatori
I dati tecnici riportati sono solo indicativi e possono essere variati in qualsiasi momento senza alcun preavviso
K-FACTOR SRL unipersonale - Via Giotto 9
–
42014 Castellarano (RE) Italy - C.F. e P.IVA (VAT#) IT 02422010369
R.E.A. di RE n. 286968
–
C.S.
€
10.000,00
–
N. Iscrizione Reg. Imprese di RE: 02422010369
Tel +39-0536261380
–
e-mail: [email protected] - http://www.kfactor.it
01
ISO9001
1) The product is delivered in open or closed version in a box with IP23 degree of protection as follows:
....................................................
Alternatively, the product comes in a box with IP44 degree of protection for outdoor use. This box is not equipped with
ventilation holes but with cooling fans on both sides. In this case the positioning can be carried out outdoors, taking care
if possible to protect from the atmospheric agents (rain, snow) and direct sunlight the enclosure with a suitable shelter
or other measure to guarantee the duration of the painting (in polyester, specific for outdoor use) and to ensure that
solar radiation does not create inadequate temperatures inside the box.
If the product is installed in SAMV fiberglass boxes, this can be installed directly outdoors.
2) To place the transformer, use a forklift or, if you use a hoist / hoist crane, the lugs supplied with the product only up to
the sam05 size. For larger enclosures, the weight of the product makes this operation dangerous. Then unscrew the four
bolts on the cover and use the lugs supplied on the transformer body, thus lifting up the transformer directly.
3) To access the connections, unscrew the 4 bolts on the cover if the product is installed in the box.
Access to the power / output cables can be made from the bottom or side by forcing the side plate that can be removed.
In this case, always use a panel cable gland to prevent the connection cables from being pulled out, causing them to
disconnect from the connectors.
4) The connection plate is as follows:
Typical connection plates of TTP models (in the photo the Dyn11 link)
Secondary
connections (3P+N)
Primary connections
Optional earth
screen
