background image

Piccolo

9

rev.A

4. Safety and handling information 

Read all safety information below and operating instructions before using Piccolo to avoid 
injury. For a downloadable version of the Piccolo User Manual and the latest version of this 
Important Product Information Guide, visit: www.k-array.com

Warning. Failure to follow these safety instructions could result in fire, shock or other injury 
or damage to Piccolo or other property.

It is important that loudspeaker systems are 
used in a safe manner.

 

Avoiding Hearing Damage.

 

Never stand close to loudspeakers driven at high 
volume. Set the volume to a safe level. You can 
adapt over time to a higher volume of sound that 
may sound normal but can be damaging to your 
hearing. If you experience ringing in your ears 
or muffled speech, stop listening and have your 
hearing checked. The louder the volume, the less 
time is required before your hearing could be 
affected. 

Choking Hazards.

 

Piccolo contains small parts, which may present a 
choking hazard to small children. Keep Piccolo and 
its accessories away from small children.

Avoiding Water and Wet Locations.

Do not install the speaker in wet or humid locations 
without using weather protection. Take care not to 
spill any food or liquid on Piccolo. To clean Piccolo, 
switch the system off, and unplug all cables and 
allow it to dry thoroughly before turning it on again. 

Do not attempt to dry Piccolo with an external heat 
source, such as a microwave oven or hair dryer. 
A Piccolo that has been damaged as a result of 
exposure to liquids could be not serviceable.

Keeping the Outside of Piccolo Clean.

 

Handle your Piccolo with care to maintain its 
appearance. To clean Piccolo, unplug all cables 

and turn off it. Then use a soft, dry or slighty 
damp cloth. Avoid getting moisture in openings. 

Don’t use window cleaners, household cleaners, 
aerosol sprays, solvents, alcohol, ammonia, or 
abrasives to clean Piccolo. 

Carrying, Handling and Installing Piccolo.

Piccolo contains sensitive components. Do not 
drop, disassemble, open, crush, bend, deform, 
puncture, shred, microwave, incinerate, paint, or 
insert foreign objects into Piccolo.

Do not operate the speaker for an extended 
period of time with sound distortion. This is 
an indication of malfunction, which in turn can 
generate heat and result in a fire. 

To reduce the risk of overheating the amplifier, 
avoid exposing it to direct sunlight.

Do not install the unit near heat emitting 
appliances, such as a room heater or stove.

No naked flame sources such as lighted candles 
should be placed near the device.

Operate Piccolo in a place where the 
temperature is between -20°C and 50°C (-4°F to 
122° F). Avoid dramatic changes in temperature 
or humidity when using Piccolo, as condensation 
may form on or within Piccolo.

During the use, it is normal for Piccolo to get 
warm. The exterior of Piccolo functions as a 
cooling surface that transfers heat from inside 
the unit to the cooler air outside.

Содержание Piccolo





























Отзывы: