How to Program the Features:
Turn off the ignition.
Press the valet switch 5 times, wait for audible re-
sponse, and then select the feature by pressing the
valet button a number of times equal to the feature
number.
Press the Lock or Unlock transmitter button to
configure the feature as desired.
Repeat pressing the valet switch to access the next
feature, and then again press the Lock or Unlock
button to configure the feature.
Total System Reset
All of the Programmable Features can easily be re-
turned to the default setting. On the bottom of the unit
there is a small access hole in the case, with two sol-
der pads below. Insert a small screw driver into the
hole and short the solder pads; when the unit responds
with a brief audible response, all of the Programmable
Features have been returned to the default setting.
Additional Hardware-Programmable Feature:
A Jumper on the PCB can configure the audible
output to be Siren or Horn Audible Output. In the
“Siren” position, the unit has 12V (+) Positive audible
output at 1 Amp; in the “Horn” position the unit has (-)
Negative audible output at .25 Amp. The default
setting is “Siren Output”.
Wiring Diagram Overview
K9-Mundial-3
Starter
Motor
Relay
7.5 Amp
Siren
Pin-Switch (+)
Battery
+
Pin-Switch (-)
Pin-Switch (-)
Relay
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
7.5 Amp
15 Amp
Left Parking Lights
Right Parking Lights
Orange = Starter Kill -
Grey = Auxiliary Output -
Red/White = Flashing Light Input (+/-)
White = Flashing Light Output
White = Flashing Light Output
Brown = Siren / Horn (+/-)
Violet = Door Input +
Black = Ground
Blue = Trigger Input -
Yellow = Acc12V
Green = Door Input -
Red = +12 Volts
Door Lock Port
Sensor Port
Valet/Override
Switch
LED Status
Indicator
K9-Mundial-3
By Omega Research & Development
Siren / Horn Jumper
Specifications subject to change REV 1/06
