9
2 Getting Started
This chapter describes proper installation environment, installation procedures, package contents
and basic information users should be aware of regarding the PXIe-69852.
Diagrams and illustrated equipment are for reference only. Actual system configuration and
specifications may vary.
2.1 Installation Environment
When unpacking and preparing to install, please refer to Important Safety Instructions.
Only install equipment in well-lit areas on flat, sturdy surfaces with access to basic tools such as
flat- and cross-head screwdrivers, preferably with magnetic heads as screws and standoffs are small
and easily misplaced.
Recommended Installation Tools
•
Phillips (cross-head) screwdriver
•
Flat-head screwdriver
•
Anti-static wrist strap
•
Antistatic mat
JYTEK PXIe-69852 modules are electrostatically sensitive and can be easily damaged by static
electricity. The module must be handled on a grounded anti-static mat. The operator must wear an
anti-static wristband, grounded at the same point as the anti- static mat.
Inspect the carton and packaging for damage. Shipping and handling could cause damage to the
equipment inside. Make sure that the equipment and its associated components have no damage
before installation.
The equipment must be protected from static discharge and physical shock. Never remove
any of the socketed parts except at a static-free workstation. Use the anti-static bag
shipped with the product to handle the equipment and wear a grounded wrist strap when
servicing.
Package Contents
•
PXIe-69852 high-speed digitizer
If any of these items are missing or damaged, contact JYTEK.
Do not install or apply power to equipment that is damaged or missing components.
Retain the shipping carton and packing materials for inspection. Please contact your JYTEK
immediately for assistance and obtain authorization before returning any product.
