2
TABLE OF CONTENT
1. SAFETY AND WARNINGS
2. USAGE
3. SET UP AND INSTALLATION
4. OPERATION
5. MAINTENANCE AND DEFECTS
6. TECHNICAL DATA
7. PARTS
8. ASSEMBLY DIRECTIONS
9. DECLARATION OF CONFORMITY
IMPORTANT NOTES !
Prior to installation, use and
maintenance of the table frame, any
installer and any user of the table
must study this assembly and operation
manual carefully, so as to gain a complete
understanding of its contents.
WARNING : FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
1. SAFETY AND WARNINGS
This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table.
Please read the operation manual prior to using the table. It provides you with important information about safety, use,
installation and maintenance of the table, and thus protecting you and your children and avoiding damage on the table.
Please guard this operation manual and pass it on to any future owner !
2. USAGE
– The electromotive, height-adjustable tables are designed for workstations in dry work environments only ( 0 - 40° C ; 20 - 90 % relative
humidity). The table height is infinitely adjustable, so that it can be set to the most ergonomically suitable working level.
– They have not been designed for other purposes than those included in this manual, e.g. they are not to be used in areas of
high humidity or dampness, nor for lifting people. Any other use is at one’s own risk !
–
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
–
CHILDREN should only use the table when supervised by adults.
–
Liability : The manufacturer accepts under no circumstances warranty claims or liability claims for damages arising from improper
use or handling of the table frame other than that described in this operation manual.
3. SET UP AND INSTALLATION
When the table has been assembled ( see assembly instructions in CHAPTER 8 ) the adjustable feet are installed so that the table is level
and does not shift. Then the table is connected to the 100 -240 VAC outlet and the table is ready for use.
– Make sure that no cables can get jammed.
– Place the table in a safe distance from window frames, radiators, furniture etc. so that people do not get stuck.
– Do not place any objects above 55 cm underneath the table.
– When moving the table after it has been assembled, the table top needs to be removed. The table CANNOT be lifted by the table top.
The desk need to be lowered to minimum height before moving.
