Jydepejsen Athene, Инструкция по установке и эксплуатации

Страница: 7 / 28

Installation of Trendline 2 without the turntable feature
If the Trendline 2 stove is to be used without the turntable feature (screws still at -
tached), please follow the standard installation procedures (page 5) under Wall View
and Corner View for the correct clearances.
Installation of Trendline 2 with the turntable
If the Trendline 2 is being used with the turntable feature, first remove the locking
screws located under the stove’s firebox (as shown below). This allows the stove to
turn freely within its 90° range. Position and center the stove properly as described:
Turn the stove to the left most position. Measure and insure that all the standard re-
quired clearances are met in that position.
Turn the stove to the right most position. Measure and insure that all the standard
required clearances are met in that position as well.
Make adjustments until all the clearances are met in both positions. These include
stove, pipe, and floor plate clearances.
If placed in the center of a room (with a 360° turn range), remember that all clear -
ances to combustible materials must be 36" for the Trendline 2.
7
IMPORTANT - Failure to follow these instructions may result in bodily injury, death, or
property damage, . You must follow the specific clearances for the turntable feature in
order not to void the warranty and liability coverage.