9
/
12
RS485 Modbus
JXBS-3001-TH--RS Temperature Humidity Sensor User Manual
The factory default is to provide 0.6 meters long wire rods. Customers can extend the wire rods as required
or sequentially.
Note that there are no yellow lines in the wire sequences that may be provided in some factory batches, in
which case the gray line is equivalent to replacing the yellow line.
2.3 Installation
The economical version of the sensor is in the form of a standard rail mount, which snaps the back side of the
sensor onto the rail.
The 86-shell wall-mounted large-screen sensor adopts the installation form of the inverted hoist hole, and the
customer can mount the screw with a distance of 60mm.
The wall-mounted king-shaped shell is a wall-mounted installation. The installation holes are located at the middle
positions on both sides of the device. The installation aperture is less than 4mm, and the hole distance is 105mm.
It can be installed using a 3mm self-tapping screw.
