JWM HI-TECH DEVELOPMENT CO LTD. www.wmkj.com.cn
JWM GUARD PATROL SYSTEM USER GUIDE
5
This pogo pin USB cable can be used to connect between the reader and PC, which is according
with DY/T1019, IEC61156, ANSI/EIA/TIA-568 standard.
4. Event wallet
Event wallet are designed to hold the signal cards( RFID tags) that has been pre-identified the
number of the cards by the reader first, and then name those cards by different events which usually
happens during the patrol at certain checkpoints(for example, like door open, power off, etc.) by the
software. The guard takes the reader and also the event wallet to begin a guard patrol. It’s better that
to put a special label with the same event name on the correct card, then it will be more easier for
the guard to identify the signal cards in time of reading the cards.
4. Battery Charging
Recharge:
* 2-3 hours each charging time
* Connect the reader to charger with USB cable, then you will found red indicator will be steady on,
