jWIN JD TV108, Руководство пользователя

Страница: 9 / 44

5
PORTABLE DVD PLAYER USER GUIDE
About This User Guide
Note: Before attempting to connect, operate or adjust this product, please
read
and
save
this User Guide completely.
Thank you
for buying the Portable DVD Player. Instructions in this User Guide describe mainly
the use of the remote control. Buttons with the same or similar marking on your Portable DVD Player
itself,
have the same functions as those of the remote control. For introduction to the
display
(Portable
DVD
Player), buttons (Remote Control), and various connections, please refer to the Quick Guide .
The section
below
covers significant information about the unit’s general behavior. Please
read carefully.
If you wish, you can use the same functions on the remote control.
To turn on the DVD player, press
Power
on the top panel of the player.
To switch the player to Stand-by mode, press
Power
. To resume to Play mode,
press Power again.
When turning on the DVD Player, the unit directly enters DVD mode.
If a disc is already placed on the disc tray, the recorder will start to load the disc right after
power is turned on.
To switch to other modes, do the following:
If there is no disc placed in the recorder, press
Mode
to toggle through different modes.
If there is a disc placed in the recorder, press
Stop
twice to completely stop DVD playback.
Press
Mode
to toggle through different modes.
When pressing
Stop
once during DVD playback, the player turns to a pre-stop status and
memorizes the position where the playback is stopped. To start play from where the playback
has been stopped, press
Play
.
Press
Stop
twice to completely stop playback.
If an
“INVALID KEY” appears on the left top corner of the screen, it indicates that the action
is
prohibited or not available.
r
r
r
r
r
1.
2.
r
r
r