23
10.参数设定
Parameter setting
参数设定只对管理员开放
The parameter setting is only open to the administrator
页面介绍
Page introduction
点缠绕
Point winding
缠绕速度设定 传送速度 0 缠绕次数设定 可实现点缠绕
Winding speed setting transmission speed 0 winding number setting can be achieved point windin g
重叠缠绕
Overlapping winding
缠绕速度与传送速度设定数值偏差小于花缠绕偏差 可实现重叠缠绕
Winding speed and transmission speed setting numerical deviation is smaller than the flower winding
deviation can be realized overlapping winding
花缠绕
Flower winding
缠绕速度与传送速度设定数值偏差大于重叠缠绕偏差 可实现花缠绕
The winding speed and the transmission speed setting value deviation is larger than the overlapping
winding deviation can realize the flower winding
复位全部
Reset all
复位全部按钮将复位全部参数，请谨慎操作
Reset all buttons will reset all the parameters, please be careful operatio n
运行位置显示
Run position display
参数设定区域
Parameter setting area
Reset all
