35
3. The “Click Target on Screen” button disappears and red instruction text directs
you to enter a name for the annotation. The box for the name becomes active
and reads “<Enter Name>”. The name can be up to 14 characters
a. As soon as you move to the Enter Name box, the software automatically
assigns the name: “Target #” (# is the total annot1).
b. You can leave the auto name or enter your own name for the target.
4. The red instruction text directs you to enter a description. The description box
reads “<Enter Description Here>”
a. Enter a verbose description of the target up to 185 characters
b. At this time if you use the Measure Distance tool or the Measure Target
Height tool, the Distance and/or Target Height will be automatically en-
tered into the description text.
5. Now click:
a. The “Save Annotation” button to save the annotation to the file
b. Or click the “Save and Capture Image” button.
i. The “Save and Capture Image” button captures a bitmap image of
the sonar image and creates a report view that displays the Anno-
tation information. The image is automatically stored in the folder
where the current sonar image file is stored.
ii.
The image is automatically named Sonar Image File Name
+ Note Name.bmp (ex. Sonar file name is Scan 1.xtf , Note Name
is “Target 2” Note image is named “Scan 1_Target 2.bmp”)
Saved Bitmap Image
Содержание SSS-100K PC
Страница 51: ...51 Left Blank ...
Страница 55: ...55 Left Blank ...
